Tag Archives: industry

Entrance

It is convenient to put him in the courtyard near the entrance to the kitchen. Try to put the fryer away from the neighbors that they are not worried about the smoke, and away from overhanging branches and wooden buildings to avoid fire. The fire closed the Wight in the wind screen or wall. For assistance, try visiting Professor Roy Taylor. And the last advice that you did not discovered residents in the instructions to a barbecue. Learn to sleep Chala use a broiler, cooking for his family – it's better than to try a new acquisition in the eyes of the guests. And do not invite your guests are a lot until you learn how to cook on an open hearth, for cooking on coals burning as people around, more complicated than on the basis of any kuhne.Raznovidnosti barbecue barbeque (photo) is Dutch oven with a grid on which meat is roasted. In some types of barbecue but it is nothing else.

Barbecue is usually somewhat improved and equipped with a shield to protect against wind and legs. In complex models, not just make out the basis of various positive check, ovens, frying pans, rotating grill, set in motion can Torchik, teapot covers, racks of knives and forks, etc. The simplest barbecue designed for installation on a flat refractory surface. Disposable barbecue grille is installed on a shallow pan with charcoal. One of the simplest models mnogora zovogo use a collapsible barbecue or BBQ bag – put into a plastic bag with a handle simple brazier with straight carbon bars, installed in two positions, this model is very convenient for a picnic.

Carbon Steel

Carbon steels are a type of instrumental staley.Oni widely used for the manufacture of metal-working tools, various accessories and parts engineering (shafts, gears, bushings, etc.), instrument making, shipbuilding and stankostroeniya.Svoystva carbon steels determined by the amount of carbon content in them and depending on this carbon tool steels are divided into grades. High-quality carbon steel (grade A) have fewer contaminants and less prone to cracking during quenching and shlifovke.Oni less dye and therefore preferable in the production of more complex form tools in steel and detaley.Uvelichenie carbon content increases its hardness, but at the same time and were not hrupkost.Uglerodistye have red hardness, ie can not retain the hardness when heated to 300-400 degrees Celsius. The original structure of carbon steels to provide them with good workability and structure meets the conditions zakalivaemost.Etim fine pearlite with uniformly distributed grains of excess tsementita.V depending on the carbon content of carbon steels have rzlichnoe application. For the manufacture of percussion instruments, such as: chisels, axes, stomestki, brand, sledge hammers and other uses carbon steels U7 and U7A. Steel U10, U10G, U10A used for tools and parts with high strength and toughness of some intended for the unstressed work wear: taps, dies, drill bits for wood, tapered and shaped gauges, bushings and clamps konduktornyh. Steel U12 and U12A – for instruments with very high hardness in the unstressed work: countersinks, reamers, taps, surgical tools, metal saws and other tools used in metalworking, woodworking, etc. Steel U13A and V13 – for high hard tool with thin blades: engraving tool, blades, scrapers, wire-drawing tool.